Dometic RM7390L User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
2. Mains power
This option should only be selected where the supply voltage of the connection
for power supply corresponds to the value specified on the data plate.
Any difference in values may result in damage the appliance.
Gas operation
The refrigerator should only be operated using liquid gas
(propane, butane). Do not use town gas or natural gas.
If the refrigerator is operated during travel using gas, the precautions
stipulated by the legislation in the respective country must be taken (in
conformity with the European standard EN 732).
Operating the refrigerator with gas is not permitted during travel in
France and Australia.
As a basic rule, operation using gas is prohibited in petrol stations.
1. Open the valve of the gas cylinder
2. Open the shut-off valve to the gas supply.
Manual ignition (battery igniter)
5. Release igniter button (C). Keep rotary switch (B) depressed for another 10-15
seconds, then release.
6. Check the inspection glass to see whether a flame is burning.
7. Repeat the entire process if the flame has gone out.
8. Use rotary switch (B) to regulate the temperature in the main refrigerator compart-
ment.
All refrigerators, whether manual or automatic ignition, are equipped with auto
matic flame protection, which automatically cuts off the supply of gas approxi-
mately 30 seconds after the flame goes out.
When using for the first time, and after changing the gas cylinder, the gas pipes
may contain air. By means of brief operation of the refrigerator and any other
gas appliances (e.g. cookers), air is removed from the gas pipes. The gas will
then ignite without delay.
4. Check the inspection glass to
see whether there is a flame
(the inspection glass is insi-
de the refrigerator at the
bottom left).
5.2.3
1. Set energy
selector switch (A)
to Gas.
2. Press and hold
rotary switch (B).
1. Set energy
selector switch
(A) to 230V.
2. Use rotary
switch (B) to
regulate the
temperature in
the main refrige-
rator compartment.
3. Activate ignition
by pressing the
button (C) and
keep it depressed.
A
B
A
B
C
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments