Dometic RM7655L User Manual download pdf (Page 27)

D+

connection and Solar Control connection

( RM 7605L only )

D+ connection

The D+ control connection must be connected to the respective vehicle

terminal (alternator signal while motor is running).

Solar control input (S+):

Connection only when using a solar system with a solar charging con-

troller with AES output.

The respective solar charging controllers are available from a specialized

dealer.

The Solar (S+) control connection must be connected to the respective

terminal of the solar charging controller (AES output).

Cable cross-sections

There are no particularly high current flows via the D+ and S+ connection;

therefore no particularly large cross-section is required for these connections

(approx. 1mm²).

Terminal strip DC

connections

(RM 7601 and RM 7605)

Retrofitting

Connections:

A = Ground heating element DC

B = Plus heating element DC

C = Ground electronics

D = Plus electronics

(RM7605)

D+ = alternator signal

S+ = AES-input-control signal

(solar charge regulator)

RETROFITTING

From the manual energy mode to the automatic energy mode

For all RM 7601 appliances (MES) there is an additional possibility for retrofitting

to an RM 7605 device with AES functions.

Please consult your nearest Dometic Customer Service or your specialist dealer.

6.9.3

6.9.4

6.9.5

permanent DC-connection

12V DC heating-connection

1 2 ... 22 23 24 25 26 27 28 29 30

No comments

Dometic RM7655L User Manual Page 27