Dometic RM 5310 Operations Instructions download pdf (Page 15)

Fig. 25

4.5.1 Installation in the recess

Push the appliance far enough into the recess

until the front edge of the refrigerator casing is

aligned with the front of the recess. Allow a

gap of 15-20 mm between the back wall of

the recess and the refrigeration unit.

Ensure that the refrigerator is installed

level in the recess.

The refrigerator must be installed draught-

proof in a recess (also refer to Section "4.1.4").

The measurements of the recess are stated in

the table below. Step A (Fig. 26) is only requi-

red for cabinets with a step. The floor of the

recess must be level, allowing the appliance to

be pushed easily into its correct position. The

floor must be substantial enough to bear the

weight of the appliance.

4.5 Installation recess

Installation

4.5.2 Recess dimensions

Fig. 26

Height Width Depth

620 mm 490 mm 450 mm

Model RM 5330

Height Width Depth

825 mm 490 mm 450 mm

Height

Step

Width

Step

Depth

Step

220 mm 490 mm 225 mm

Model RM 5380

Height Width Depth

825 mm 490 mm 450 mm

Model RM 5310

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Dometic RM 5310 Operations Instructions Page 15