Dometic RM4601 User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
14
MAINTENANCE
Always turn to a qualified service technician who is fa-
miliar with LP gas systems and refrigerator.
We recommend that a service technician check the re-
frigerator once a year.
Check all connections in the LP gas system for gas
leaks. Connections can be tested for leaks using a
soap solution. Do not use a naked flame! If there is
any suspicion of damage, call for a service techni-
cian.
The ventilation openings are unobstructed.
The Instruction Manual is available.
Check that the burner is clean and free from com-
bustible material.
SOME USEFUL HINTS
Make sure that:
The refrigerator is not operating on 12 V when the
vehicle is parked; otherwise you will drain the car
battery in a short time.
Defrosting is carried out periodically
The refrigerator is clean and dry with the door left open
when it is not to be used for some time.
Liquids or items with a strong odour are well packed.
The ventilation openings are unobstructed.
The door is secured by means of the travel catch
when the caravan is on the move.
SERVICE AND SPARE PARTS
Service and spare parts are obtainable from your dealer
or Dometic - consult the telephone directory.
INSTALLATION INSTRUCTIONS
GENERAL INSTRUCTION
This appliance must be installed by an authorised
person and conform to all relevant local authorities.
The appliance shall be installed in accordance with
the manufacturers installation instructions, local
gas fitting regulations, municipal building codes,
electrical wiring regulations, the AGA Installation
Code AG 601 for Gas Burning Appliances and Equip-
ment, and any other relevant statutory regulations.
REPOSITIONING THE HINGES
The refrigerator is equipped with reversible doors.
A special door reversing kit must be used to reverse the
doors.
For further information, contact your dealer or Dometic.
DOOR PANEL
Door panels can easily be fitted or changed. The dimen-
sions of the panels must be:
Model RM 4601
Height upper door 402 ±1mm
lower door 826 ±1mm
Width 525 ±1mm
Thickness max. 4 mm
The refrigerator is delivered with door panels.
When mounting the panel, proceed as follows.
See figure 8.
open the door 90 degrees
remove the door decoration strip from the door by
taking out the 3 screws and remove the old panel
insert the new panel and push the panel downwards
replace the decoration strip and screws
INSTALLATION/BUILDING-IN
The refrigerator is intended for installation in a caravan
or camper van, and the description relates to this appli-
cation.
The refrigerator must not be exposed to radiated heat
from hot objects.
It is not a good practice to install the refrigerator so that
the vent openings are covered by the vehicle’s entrance
door when this is set open. This would reduce the venti-
lation airflow to the cooling unit and reduce refrigeration
performance.
The enclosure
The refrigerator must be installed in a substantial enclo-
sure and must be level, the dimensions are shown in
TECHNICAL DATA.
The bottom of the enclosure must be horizontal and even
so that the refrigerator can be easily pushed into place.
It must be sturdy enough to carry the weight of the re-
frigerator.
Make sure that there is a complete seal between the
front frame of the refrigerator and top, sides and
bottom of the enclosure.
FIG. 2
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments