Dometic RH840AC User Manual download pdf (Page 10)

Check List

10

5.4

Failure : No cooling (the aggregate at the back of the device is cold).

Possible Cause Self Help Authorised Service

a.) The thermostat is set to “0”.

b.) The device plug is not

plugged in.

c.) No voltage in socket.

a.) Set temperature control to

middle position.

b.) Plug in device plug.

c.) Check building fuse..

Failure : No cooling (the aggregate is warm).

Possible Cause Self Help Authorised Service

a.) The device was only

switched on a short while ago.

b.) Defective cooling aggregate.

a.) Switch on the device and

let it run for 1 hour.

b.) Exchange fridge

Failure : Poor Cooling Performance.

Possible Cause Self Help Authorised Service

a.) The cooling aggregate is not

sufficiently ventilated.

b.) The fridge door does not

close tightly.

c.) Light permanently on when

door closed.

d.) The fridge was stocked a

short while ago.

a.) Check that the ventilation

grilles are not covered. Check

that device has been installed

properly (installation instruction

4.5)

b.) Check installation in line

4.5.

d.) Check fridge after 1 hour

for proper cooling.

b.) Is door magnet

there? Install new door,

if required.

c.) Replace lighting

sensor. Install new door,

if required.

Failure : Frost formation in fridge.

Possible Cause Self Help Authorised Service

a.) The fridge door does not

close tightly.

a)Check installation in line 4.5.

a.) Is door magnet

there? Install new door,

if required.

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments