Dometic VT2500 User Manual download pdf (Page 13)

Water supply

Electrical installation

ELECTRICAL INSTALLATION MUST BE CARRIED OUT BY QUALIFIED

PERSONNEL ONLY !

The 12V DC connection to the toilet electro-

nics is shown in the adjacent figure.

Connect by right polaraity :

RED

+ WHITE

The connection cable must have a cross-

section of at least 4 mm². It must be protec-

ted by an 8-amp-fuse (wiring diagram pg.15)

The board battery should be protected by an

undervoltage cut-out.

Connection display on the control electronics

6.6

The water supply is provided with

the aid of a pump (this can also be

the pump available in the vehicle)

and a hose connection from the

fresh-water container.

Fasten a hose clamp to the water-supply connection.

6.7

6.7.1

display panel

4-strand, coded connection cable

electronic board

The 4-strand, coded connection cable (A)

(cable cross-section 1 mm²) is connected to

the circuit board as shown in the figures.

base station

red

(+12V)

white

(GND)

12V-- connection

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Dometic VT2500 User Manual Page 13