Dometic WMD1050 User Manual download pdf (Page 12)

- 12 -

Using the appliance

Have you removed all the transit locking devices?

The very first time the machine is used, you should

run a wash programme without any load, to clear

any residues which may have been left by the

manufacturing process. Pour approx. 100 ml of de-

tergent straight into the drum and run a programme

at 60°. When the programme is finished, the machine

will be ready for use.

Starting a wash programme

Before starting up the machine, check that:

● the door is properly closed

● the appliance is plugged in

● the water supply tap is turned on

To start the machine, proceed as follows:

1. Pull the door latch gently to open the door.

2. Fill the drum evenly with the laundry. Large and

small items can be mixed.

Always try to wash full loads: for maximum load

weights see the programme charts. You should

only reduce the load weight for heavily soiled items

and sensitive materials.

3. Close the door.

4. Pull out the dispenser drawer.

5. Measure out the amount of detergent required and

pour it into the larger compartment on the left (fig 1).

6. Pour fabric softener into the smaller compartment

on the right without exceeding the max. level (fig. 2).

7. Close the drawer.

8. Select the required programme (fig. 3).

9. Turn the spin speed selector to the required

position (fig. 4).

10. Select the required option. The corresponding

light illuminates (fig. 5).

11. Press the Start/Pause button to start the

required wash programme. The indicator lights

and comes on and the programme starts.

Changing a wash programme

The programme can be changed as long as the Start/Pause

button hasn’t been depressed. If the programme has

started, you can only change it by turning the programme

selector to the ”Reset” position and cancel the programme.

Select a new programme and press the Start/Pause button.

If you turn the programme selector to another

programme when the machine is running, the

lights in the programme progress display start to

flash. The machine will not perform the new

selected programme.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Dometic WMD1050 User Manual Page 12

Comments to this Manuals

Related products and manuals for Washing machines Dometic WMD1050