Dometic WMD1050 User Manual download pdf (Page 19)

650-800 mm

The drain hose can be connected directly

into the pipe (e.g. beneath a washtub or

sink), above the water trap. The drain hose

must be arranged so that some part of it’s

length is routed up to a level corresponding

to the top edge of the tub and fixed in place

there.

Directly into a drain pipe at a height of

not less than 65 cm and not more than 80

cm.

Their must be an air gap around and below

the end of drain hose. This means that the

internal diameter of the standpipe must be

larger than the outer diameter of the hose.

650-800 mm

40 mm

The hose must not be sticked into the

standpipe more than 50 mm and it has to

be fixed in this position. The drain hose

must not be kinked.

The drain hose can be extended up to total

3,5 m. For the extension piece use a hose

with an internal diameter at least as large as

that of the machine's own hose. Use a suit-

able hose connector.

Information on the electrical connection is

given on the rating plate on the inner edge

of the appliance door.

Check that your domestic electrical installa-

tion can take the maximum load required,

also taking into account any other applian-

ces in use.

Connect the machine to an earthed

socket.

The manufacturer does not accept

any responsibility for damage or

injury through failure to comply

with the above safety precaution.

The power supply cable must be

easily accessible after installing the

machine.

Should the appliance power supply

cable need to be replaced, this

must be carried out by a Service

Centre.

Environment concerns

The symbol on the product or on its

packaging indicates that this product may

not be treated as household waste. Instead

it should be taken to the appropriate

collection point for the recycling of electrical

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments