Dometic RM1350 User Manual download pdf (Page 4)

- 4 -

This appliance is certiﬁed under the latest edition of ANSI Z21.19•CSA 1.4 Refrigerators using gas fuel. The installation

must conform with local codes, or in absence of local codes, the following standards as applicable.

In the U.S. the installation must conform with:

National Fuel Gas Code, ANSI Z223.1/NFPA 54

(latest edition).

Recreational Vehicles Code, ANSI A119.2 (latest edition).

Manufactured Home Construction and Safety Standard, Title

24 CFR, Part 3280.

If an external electrical source is utilized, the refrigerator, when

installed, must be electrically grounded in accordance with

local codes or, in the absence of local codes, the National Elec-

trical Code, ANSI/NFPA 70 - (latest edition).

•

In CANADA, the installation must conform with:

Natural Gas and Propane Installation Code, CSA B149.1

CSA Z240 RV Series, Recreational Vehicles.

Current CSA Z240.4, Gas-equipped Recreational Vehicles

and Mobile Housing.

If an external electrical source is utilized, the refrigerator,

when installed, must be electrically grounded in accordance

with local codes or, in the absence of local codes, the Canadian

Electrical Code, CSA C22.1, Parts I and II - (latest edition).

•

CERTIFICATION AND CODE REQUIREMENTS

VENTILATION REQUIREMENTS

An opening toward the outside at ﬂoor level in the refrigera-

tor compartment has to be provided for ventilation of heavier-

than-air fuel gases. The lower vent of the recommended kits is

provided with proper size openings. The ﬂow of combustion and

ventilating air must not be obstructed.

The lower side vent is ﬁtted with a panel, which provides an ad-

equate access opening for ready serviceability of the burner and

control manifold of the refrigerator. This should be centered on

the back of the refrigerator.

GENERAL INFORMATION

Provide necessary air circulation over the cooling unit. Open-

ings for air supply or for venting of combustion products shall

have a minimum dimension of not less than 1/4 inch.

Proper installation requires one lower fresh air intake and one

upper exhaust vent. The ventilation kits shown in this manual

have been certiﬁed for use with RM1350. The ventilation kits

must be installed and used without modiﬁcation.

The certiﬁed vent system kits are listed in the following table.

For further information, please refer to the “Refrigerator Vent

Application Guide”, Form no 3308666.019.

Side vent cutout

CERTIFIED VENT SYSTEM KITS

Kit no. Components Part no.

5A =

Option 1

Roof Base

Roof Cover

Side Vent

3103633.XXX* or 3310893.XXX*

3103634.XXX* or 3310894.XXX*

3109349.XXX*

Option 3-E

Upper side vent

Lower side vent

3109349.XXX*

* Fill in “XXX” with color code numbers. For color codes, contact

your supplier.

LOWER VENT CUTOUT

13-5/8”

28-5/8”

It is of especially importance that the airﬂow

around the burner housing, the boiler insulation

and the ﬂow of combustion gases must not be

obstructed. Items placed in the vicinity of the

refrigerator compartment accordingly must be

secured away from the refrigerator tubing and ﬂue.

CAUTION

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Dometic RM1350 User Manual Page 4

Comments to this Manuals

Related products and manuals for Fridges Dometic RM1350