Dometic F400 Operations Instructions Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
8. Trouble shooting
Before calling a service technician please check
carefully the operating instructions, service booklet
and the warranty terms and conditions:
Are location and ventilation satisfactory?
Is the appliance level?
Is there a current in the wall socket and is the
connection suitable for the appliance?
Is the mains power cable damaged?
For mains operation, is the electric thermostat
swiched on?
For gas operation, was the safety valve knob
pressed down long enough?
Is the thermostat knob set towards the maximum
position?
Is the gas cylinder or the pressure regulator valve
open?
Is there any gas in the cylinder? (If by shaking, no
liquid movement can be detected, then the
cylinder is empty.)
Is more than one power source connected (such
as gas or electricity)?
Was warm food placed in the unit?
Was a large quantity of food put in at one time?
9. Putting into operation
You must, in all instances, operate the
appliance from a single energy source only.
Connecting several energy sources at the same time
will cause failure of the appliance.
Technical data:
9.1 Connecting to 240 Volt
electrical mains
Make sure no other energy source is connected
(gas, 12V).
The appliance may only be operated from nominal
voltage mains as shown on the data plate. The
appliance mains plug may be connected to a mains
socket earthed in accordance with regulations.
Model F400
Type JCB-3
Gross volume 39 litre
Mains operation 240V (AC)
Input 120W (0,5 Amps)
Energy consumption 2.1 kWh/24h
Battery operation 12V (DC)
Input 120W (10 Amps)
Energy consumption 240Ah/24h
Gas pressure (p) 2.75kPa (11 water gauge)
Gas type LP
Jet size 28
Gas consumption 0,86 Mj/h
Climate class N
Refrigerant 550g NH
3
Absorption
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments