Dometic RMT7650L User Manual download pdf (Page 31)

D+

connection and Solar Control connection

(

AES

only

)

D+ connection:

The D+ control connection must be connected to the respective vehicle

terminal (alternator signal while motor is running).

Solar control input (S+):

Connection only when using a solar system with a solar charging

controller with AES output.

The respective solar charging controllers are available from a specialized

dealer.

The “Solar” (S+) control connection must be connected to the respective

terminal of the solar charging controller (AES output).

Cable cross-sections

There are no particularly high current flows via the D+ and S+ connection;

therefore no particularly large cross-section is required for these connections

(approx. 1mm²).

Terminal strip DC

connections

(

MES

and

AES

)

Retrofitting

Connections:

A = Ground heating element

B = Plus heating element DC

C = Ground electronics

D = Plus electronics

D+ = alternator signal

S+ = AES-input-control signal

(solar charge regulator)

8.9.3

8.9.4

8.9.5

permanent DC-connection

12V DC

heating-connection





RETROFITTING

From the manual energy mode to the automatic energy mode

For all

MES

appliances there is an additional possibility for retrofitting to an

RMT 7xx5 device with AES functions.

Please consult your nearest Dometic Customer Service or your specialist dealer.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Dometic RMT7650L User Manual Page 31

Comments to this Manuals

Related products and manuals for Fridge-freezers Dometic RMT7650L