Dometic RM 6291(L) Operations Instructions download pdf (Page 20)

Installing the ventilation system

To install the ventilation grilles, cut two

rectangles (451mm x 156mm) in the outer wall

of the vehicle (for position of the cuts, see

point 6.3).

Securing the refrigerator

In the sidewalls of the refrigerator, there are four plastic sleeves with screws for

securing the refrigerator. The sidewalls or rails attached for securing the refrigerator

must be designed in such a way that the screws will remain firmly in place even when

under increased load (while the vehicle is moving).

Always insert screws through the sleeves provided;

otherwise, structural parts embedded in the foam,

such as cables, etc., may be damaged.

Once the refrigerator is in its final position, secure the

screws into the wall of the recess.

The screws must penetrate through the sheet metal

casing of the refrigerator.

6.4

6.5

1. Seal the mounting frame,

making it waterproof.

2. Insert the frame and

screw into position.

3. Insert the ventilation grilles.

4. Lock the ventilation

grilles.

5. Clip the extractor insert in position

(only for upper ventilation system)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Dometic RM 6291(L) Operations Instructions Page 20