INSTALLATION ANDOPERATING INSTRUCTIONSREFRIGERATOR FOR LP-GAS AND ELECTRIC OPERATIONRM 2652 RM 2852USA Corporate Office CANADAService Office 2320
10DESCRIPTION OF OPERATING MODESAUTO MODEWhen operating in the AUTO mode, the AUTO modeindicator lamp (A) will illuminate.The control system will auto
11! WARNINGWhen all the frost has melted, dry the interior of the re-frigerator with a clean cloth. Replace all food and turnyour refrigerator back on
12ELECTRIC EQUIPMENTCARTRIDGE HEATERThe heat necessary for the operation of an absorptioncooling unit is supplied by an electric heater mounted ina po
13B. Check all connections in the LP gas system (at theback of the refrigerator) for gas leaks. The LP gassupply must be turned on. Apply a non-corros
14H. Burner not located properly under flue tube.Relocate.I. Burner damaged.Replace.J. Odor from fumes.1. Dislocated burner2. Damaged burner3. Dirty f
1511111123345CERTIFIED VENT SYSTEM KITSREFRIGERATOR KITMODEL NO. COMPONENTS PART NO.RM 2652 4A Roof Base 3103633.XXX*RM 2852 Roof Cover 3103634.XXX*Lo
16Put a screwdriver into the slot of the shelf lock.Turn the screwdriver counterclockwise.Remove the shelf locks from the wire shelf.Insert the ends o
17RM 2652, RM 2852
20MO-FO 0327
3Refrigerator control panelFIG. 2CHECKGASAUTOONOFFAUTOMATIC REFRIGERATOR TEMPERATURE CONTROL12ABCLEGEND1. Main Power Button ON/OFF2. AUTO/GAS Mode Sel
4INSTALLATIONGENERAL INSTRUCTIONThis appliance is designed for storage of foods andstorage of frozen foods and making ice.This appliance is certified
512 Volts DC ConnectionThis refrigerator model is not designed for 12 volt DCoperation of the cooling system; however, a continuous12 volt DC must be
62. Once the lower front strip is slipped under thehinge, the part is possible to swing into place asshown in FIG. 6.3. Secure the refrigerator and th
7CERTIFIED INSTALLATIONCertified installations require one roof vent and one lowerside vent.For “Certified Vent System Kits” see page 15.For further i
8OPERATINGINSTRUCTIONSIMPORTANCE OF LEVELING AREFRIGERATORIn an absorption refrigerator system, ammonia is lique-fied in the finned condenser coil at
9GAS MODE1. Move the AUTO/GAS mode selector button (2) to theUP position. The AUTO mode indicator lamp (A) willgo off. Within 45 seconds the burner sh
Where is the AC fuse located at? Thank you.