Dometic RM 6291(L) Operations Instructions download pdf (Page 21)

Installation recess

The refrigerator must be installed draught-free in a recess.

The measurements of the recess are given in the table below.

Step (A) is only required for cabinets with a step. Push the appliance far enough into

the recess until the front edge of the refrigerator casing is flush with the front of the

recess. Allow a gap of 15-20 mm between the back wall of the recess and the

refrigeration unit. The floor of the recess must be level, allowing the appliance to be

pushed easily into its correct position. The floor must be substantial enough to bear the

weight of the appliance.

Ensure that the refrigerator is installed level in the recess.

Recess measurements:

Model Hight H Width W Depth T Hight HSt Depth TSt

RM 6270 825 mm 490 mm 515 mm 220 mm 235 mm

RM 6271 825 mm 490 mm 515 mm 220 mm 235 mm

RM 6290 825 mm 529 mm 515 mm 220 mm 235 mm

RM 6291 825 mm 529 mm 515mm 220 mm 235 mm

RM 6360 825 mm 490 mm 515 mm - -

RM 6361 825 mm 490 mm 515 mm - -

RM 6400 825 mm 529 mm 515 mm - -

RM 6401 825 mm 529 mm 515 mm - -

6.6

Width of recess = W

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Dometic RM 6291(L) Operations Instructions Page 21