Dometic RM 2801 Service Manual download pdf (Page 65)

AES Refrigerator CONTINUITY READINGS FOR SWITCH CARD

HARNESS continued

5. AC/GAS FUNCTION LAMP

Measure resistance between the brown terminal on the 10 pin connector to the gray terminal

on the 10 pin connector. The proper resistance is approximately 65,000 OHMS.

6. GAS FUNCTION SWITCH

A. With the gas function switch manually depressed, continuity should be indicated between

the violet terminal on the 10 pin connector to the orange terminal on the 10 pin connector.

B. With the gas function switch

NOT

depressed, no continuity should be indicated between the

violet terminal on the

pin connector to the orange terminal on the 10 pin connector.

7. GAS FUNCTION LAMP

Measure the resistance between the brown terminal on the 10 pin connector to white terminal

on the 10 pin connector. The proper resistance is approximately 65,000

OHMS.

8. 120V MODE LAMP SWITCH

A. With the mode switch

(?)

manually depressed, resistance should be indicated between the

brown terminal on the 10 pin connector to the red terminal on the 7 pin connector. The

proper resistance is approximately 2 1,000 OHMS.

B. With the mode switch NOT depressed, no resistance should be indicated between the brown

terminal on the 10 pin connector to the red terminal on the 7 pin connector.

12V

MODE LAMP AND SWITCH

A. With the mode switch manually depressed, resistance should be indicated between the brown

terminal on the 10 pin connector to the orange terminal on the 7 pin connector. The proper

resistance is approximately 2 1,000 OHMS.

B. With the mode switch NOT depressed, no resistance should be indicated between the brown

terminal on the 10 pin connector to the orange terminal on the 7 pin connector.

A-8-2

Manual Compliments of

Northwest RV Supply

Printed From

http://www.nwrvsupply.com

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 93 94

No comments

Dometic RM 2801 Service Manual Page 65