Dometic RM 2801 Service Manual download pdf (Page 53)

(139)

You should hear a sharp click from the

solenoid and now obtain a gas pressure

reading. If these results are not realized the

solenoid is defective and must be replaced.

(140)

If these results are correct you must next

check the wires that connect to the solenoid

voltage. The results should be close to the

voltage coming to the appliance.

(141)

We will now check the igniter-reigniter

assembly. First turn the unit on and check for

voltage between the positive and ground

terminals on the igniter. If you obtain a DC

voltage reading, the igniter is receiving power.

(142)

If you do not obtain a reading, move the meter

probe from the ground terminal of the igniter

to the negative terminal on the terminal block.

If you now have a reading on the meter and

you did not at the igniter, you have a problem

in the ground circuit. If you obtained a

reading on both the tests, the igniter is

receiving power.

A-6-46

Manual Compliments of

Northwest RV Supply

Printed From

http://www.nwrvsupply.com

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 93 94

No comments

Dometic RM 2801 Service Manual Page 53