Dometic RM 2801 Service Manual Page 64

  • Download
  • Add to my manuals
  • Print
  • Page
    / 94
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 63
AES Refrigerator
CONTINUITY READINGS FOR SWITCH CARD & HARNESS
Model 3801
The following is a list of checks that should be made on the switch card and harness assembly before
replacing the switch card or wiring harness. These checks are to be done with wiring harness
REMOVED from the printed circuit board.
1. ON-OFF SWITCH
A. With the switch in the “ON” position, continuity should be indicated between the yellow
terminal on the 10 pin connector to the orange terminal on the 10 pin connector.
B. With the switch in the “OFF” position, no continuity should be indicated between the yellow
terminal on the 10 pin connector to the orange terminal on the 10 pin connector.
C. With the switch in the “OFF” position, continuity should be indicated between the red
terminal on the 10 pin connector to the orange terminal on the 10 pin connector.
D. With the switch in the “ON” position, no continuity should be indicated between the red
terminal on the 10 pin connector to the orange terminal on the 10 pin connector.
2. AES FUNCTION SWITCH
A. With the AES function switch manually depressed, continuity should be indicated between
the blue terminal on the 7 pin connector to the black terminal on the 7 pin connector.
B. With the AES function switch NOT depressed, no continuity should be indicated between
the blue terminal on the 7 pin connector to the black terminal on the 7 pin connector.
3. AES FUNCTION LAMP
A. Measure resistance between the brown terminal on the 10 pin connector to the brown
terminal on the 7 pin connector. The proper resistance is approximately 65,000 OHMS.
4. AC/GAS FUNCTION SWITCH
A. With the AC/GAS function switch manually depressed, continuity should be indicated
between the blue terminal on the 10 pin connector to the orange terminal on the 10 pin
connector.
B. With the AC/GAS function switch NOT depressed, no continuity should be indicated
between the blue terminal on the 10 pin connector to the orange terminal on the 10 pin
connector.
A-8-1
64
Manual Compliments of
Northwest RV Supply
Printed From
http://www.nwrvsupply.com
Page view 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 93 94

Comments to this Manuals

No comments